碱改性γ－Al_2O_3催化剂表面碱强度分布与COS水解活性的研究

用非水滴定法和Ｈａｍｍｅｔｔ系列指示剂测定了ＣＯＳ水解碱改性γ－Ａｌ_２Ｏ_３催化剂的表面碱强度分布．发现表面碱强度分布不均匀与表面能量分布不均匀相呼应．采用零点酸碱强度（Ｈ_（０，ｍａｘ））及碱中心区域分析法，Ｂｒｏｎｓｔｅｄ催化定律，进一步证实ＣＯＳ水解反应具有明显碱催化特征，较高活性催化剂的Ｈ_（０，ｍａｘ）一般为１０左右，对ＣＯＳ水解反应起主要作用的碱性中心的碱强度（Ｈ_０）为４．８≤Ｈ_０≤９．８．对碱金属氧化物改性后的γ－Ａｌ_２Ｏ_３催化剂，Ｂｒｏｎｓｔｅｄ规律在每个碱强度分区域内是适用的．     

6291型热变形温度和维卡软化温度测试仪的校准及故障排除

介绍6291型热变形温度和维卡软化温度测试仪的温度校准和位移校准方法，对测试仪的一些常见故障，例如电源故障，主温度传感器故障，电加热系统控制单元故障及测试站的温度偏差较大等进行了分析，并给出了排除故障的方法。     

一测多评方法应用于高效液相色谱法测定防晒产品中15种防晒剂的含量

选用CAPCELL PAK C18色谱柱为分离柱,柱温为30℃,进样体积为10.0μL,并用不同比例的(A)甲醇、(B)四氢呋喃和(C)0.008 2mol·L^-1高氯酸溶液的混合液作为流动相,按程序梯度洗脱模式对市售防晒产品中所用的15种防晒剂的标准品进行色谱分离,并在波长311nm处进行紫外检测。实样分析时,称取样品0.25g,用甲醇、四氢呋喃、水和高氯酸(体积比为250∶450∶300∶0.2)的混合液(以下简称混合溶剂)15 mL超声提取30 min,用混合溶剂定容至25.0mL,离心10min,分取上清液1.0mL,加入混合溶剂定容至10.0mL,经0.45μm滤膜过滤,取滤液按仪器工作条件进行高效液相色谱分析。结果表明:所测定的15种防晒剂在一定的质量浓度范围内与其对应的峰面积呈线性关系。选定其中的二苯酮-3为参照物,并根据其余14种化合物的质量浓度和峰面积计算了各化合物的相对校正因子和相对保留时间等参数,确定了用一测多评法(QAMS)测定防晒产品中15种防晒剂的条件。还对色谱柱的型号、色谱仪器的型号以及柱温、进样量等对相对校正因子和保留时间可能产生影响的因素进行了系统试验。证明了在选定的色谱柱型号的前提下,用QAMS方法可实现防晒产品中15种防晒剂含量的同时测定。应用QAMS方法测定了6个批次防晒产品中的防晒剂含量,所得结果与用标准曲线法计算的结果基本一致,表明QAMS方法在降低检测成本和节省检测时间方面效果显著。     

Kinetic Determination of Microquantities of Rutin by Perturbation of the Bray-Liebhafsky Oscillatory Reaction in an Open System

A kinetic method is described for the microquantitative (microconcentration/microvolume) determination of rutin based on potentiometric monitoring of the concentration perturbations of the Bray-Liebhafsky (BL) oscillatory reaction being in a non-equilibrium stationary state close to a bifurcation point. The experiments are carried out in an open reactor. The response of the matrix system to perturbations by different concentrations of rutin ethanolic solutions is followed by a Pt-electrode. In the concentration range between 7.8×10^–8moldm^–3 and 9.1×10^–6mol dm^–3, we found a linear dependence of the maximal potential shift, E_m, on the logarithm of the rutin concentrations. The unknown concentrations can be determined from the calibration curve up to an accuracy of ±5%. The detection limit is 3.6×10^–8mol dm^–3. The amount of required sample can be as small as 10µL.     

病态分析体系有偏估计的研究

运用广义岭估计和Ｌｉｕｋｅｊｉａｎ提出的有偏估计，对病态分析体系进行了数值模拟和实际光度测定，结果表明，广义岭估计显优于最小二乘估计，Ｌｉｕｋｅｊｉａｎ法有功效，可和为解析病态分析体系的化学计量学方法。     

超临界流体萃取仪器的研制

本文报道了以国产原配件为基础，成功地研制了分析规模的超临界流体萃取仪器、并对仪器性能进行了全面考察，仪器性能稳定，重现性良好（ＲＳＤ＜３．１％），定量线性关系可靠，可满足定量萃取的要求。     

化学计量学在分析化学中的应用

从化学定量构效关系、模式识别法、人工神经网络、波谱化学、多元校正分析法等方面对化学计量学在分析化学中的应用进行了综述。阐明了化学计量学在分析化学中的作用及广阔的应用前景。     

Analytical solutions of the lattice Boltzmann BGK model

Analytical solutions of the two-dimensional triangular and square lattice Boltzmann BGK models have been obtained for the plane Poiseuille flow and the plane Couette flow. The analytical solutions are written in terms of the characteristic velocity of the flow, the single relaxation time , and the lattice spacing. The analytic solutions are the exact representation of these two flows without any approximation. Using the analytical solution, it is shown that in Poiseuille flow the bounce-back boundary condition introduces an error of first order in the lattice spacing. The boundary condition used by Kadanoffet al. in lattice gas automata to simulate Poiseuille flow is also considered for the triangular lattice Boltzmann BGK model. An analytical solution is obtained and used to show that the boundary condition introduces an error of second order in the lattice spacing.     

Education by Teaching Analytical Chemistry in Romania

A review is given on the history of the development of analytical chemistry in Romania, its present role in University teaching, and on measures that are planned in order to improve teaching and education.Received January 12, 2003; accepted March 7, 2003 Published online July 16, 2003     

Evaluation of the limit of performance of an analytical method based on a statistical calculation of its critical concentrations according to ISO standard 11843: Application to routine control of banned veterinary drug residues in food according to European Decision 657/2002/EC

Traceability of the measurement of analytical parameters capable of evaluating the performance of methods is an important concept for the assessment of quality for the routine control, especially for residue monitoring of non-authorized medicinal substances in food from animal origin. The European Decision no. 657/2002/EC recommends to calculate two statistical limits, CCα and CCβ, which allow to evaluate the critical concentrations above which the method reliably distinguish and quantify a substance taking into account the variability of the method and the statistical risk to take a wrong decision. The calculation, which can be derived from the ISO standard no. 11843 is applied on a routine basis. An example displays a very simple way for evaluating the performance of an LC-MSMS method which has been validated a few years ago and is qualified onto a Micromass Quattro LCZ tandem mass spectrometer to monitor and confirm the nitrofuran metabolite residues in food from animal origin. Community Reference Laboratory for Antimicrobial Veterinary Drug Residue Control in Food from Animal Origin